what gear ratio for bass fishing

What Gear Ratio For Bass Fishing? A 6:1 gear ratio is a good medium speed reel for a baitcasting reel and can be used in many different bass fishing scenarios. If your reel says something like 6.3:1 then the spool will rotate 6.3 times for every complete handle turn.

What is a 7.5 1 gear ratio good for? 7.5:1 Reel – With my 7.5:1 gear-ratio reel, I like to use this reel when I’m fishing single-hook lures like a buzzbait, a spinner bait, bladed jigs and a frog.

What is the best gear ratio for spinnerbaits? Spinnerbaits: For spinnerbaits, a moderate retrieve reel of around 6.3:1 ratio will perform adequately. This speed allows for power to move larger bladed baits through the water, but also has the speed to burn in baits when need be.

Is a higher gear ratio better for fishing?

Higher gear ratios tend to lead to more speed, but less power. This can mean reeling in heavy fish is difficult while smaller fish benefit more from the increased speed.

How do I choose gear ratio?

The conventional procedure for selecting gear ratios is to pick ratios that run the engine rpm to redline at the end of the medium and longest straights, and pick the lower gear ratios to minimize the rev drop at each shift. This method minimizes the number of shifts per lap.

What is a good gear ratio for jig fishing?

High gear ratio reel | 7.1:1 thru 8.1:1 Topwaters, jerkbaits, jigs, plastics and even lipless crankbaits warrant the use of a high speed reel. These techniques create a lot of slack in your line, and if you get bit 30 yards away from the boat, a high gear ratio comes in handy for getting a solid hookset.

What is the best gear ratio for a baitcaster?

The most common reel on the market has a 6.4:1 gear ratio. This will allow you to work both fast moving presentations as well as slow. However, for certain techniques and applications, a very high or low gear ratio will often work best. For instance, burning a spinnerbait or buzzbait is best done with a 7.1:1 reel.

What’s the best gear ratio for crankbaits?

Crankbait specialists like the power of a low-speed reel such as a 5.0:1 model for winching deep-diving crankbaits to their maximum depths. Whereas guys who like to rip lipless crankbaits through vegetation or keep a buzz bait skittering across the surface prefer reels with 7.1:1 or higher gear ratios.

What speed reel is best for crankbaits?

What is the Best Reel Gear Ratio for Crankbaits? As already mentioned, slower to medium reels are the best, because they can be used with all types of crankbaits, including deep diving (slower reels) and squarebill (medium reels, 6-6.5:1). So, gear ratio up to 6.5:1 is the best option.

What gear ratio is best for topwater?

The Best Gear Ratio for Topwater Fishing is a 7:1 or Higher.

Are 3.73 or 4.10 gears better?

4.10 is the typical gear ratio for a high-performance vehicle like a sports car or SUV because it provides better acceleration than 3.73 because of the faster second and third gears, which provide more torque at lower speeds to accelerate from a stop.

What are 3.73 gears good for?

FACT: A 3.73 axle ratio is ideal for towing heavy loads on flat terrain and will produce increased fuel economy during steady-state, long-distance highway driving.

Are more ball bearings in a reel better?

When they’re considering purchasing a reel, anglers can’t help but notice how many bearings it offers. But the truth is that reels with lots of bearings aren’t necessarily better. The quality of the bearings, and the quality of the reel that contains them, are much more important than the number of bearings.

What is gear ratio on a baitcaster?

Gear ratios in reels are simply an expression of how many times the reel spool turns each time you turn the reel handle. So a 6.4:1 ratio means that for every one revolution of the reel handle, the spool turns 6.4 times.

What’s better Baitcast or spinning reel?

Baitcasters are suitable for large fish and heavy lures, while spinning ones are much easier to use. Baitcaseres are also better for heavier lines, while spinning ones are more forgiving when it comes to backlashes.

When should you throw crankbaits?

Crankbaits work best in the spring, summer, and fall, except during the few weeks a year fish are spawning. Use medium-diving crankbaits when waters are about 50-60 degrees. As the season moves along and the fish start moving from the banks toward deeper waters, use a shad-colored crankbait.

Which gear ratio is faster?

A lower (taller) gear ratio provides a higher top speed, and a higher (shorter) gear ratio provides faster acceleration. . Besides the gears in the transmission, there is also a gear in the rear differential. This is known as the final drive, differential gear, Crown Wheel Pinion (CWP) or ring and pinion.

What makes a good crankbait rod?

A good crankbait rod should have a relatively slow action. In other words, the rod should start to bend down about half way down when moderate pressure is applied to the top section. Fast action means that just the top third will bend with the same pressure.

What reel does KVD use for crankbaits?

The Strike King Hybrid Hunter Crankbait or KVD Squarebill Crankbait is used if you’re fishing around a lot of shallow targets. This is the setup that gives you a ton of control. I match mine with my KVD cranking reel. This reel has a 6.2:1 gear ratio which brings in 25 inches per turn.

How many ball bearings should be in a fishing reel?

Most quality reels will have at least four ball bearings, which allows the balls to separate within the races equally and provide some level of friction control.

What is the best gear ratio for frog fishing?

The best gear ratio for frog fishing is 7.5:1 to 8.0:1. It’s important to get a reel with a high speed retrieve rate, since you need to pick up your slack as fast as possible when a bass grabs your lure, so you can set the hook. A high speed reel will help you to do this fast enough to set the hook effectively.

What is the best fishing line for crankbaits?

The best multipurpose line is monofilament. It has been an all-around great bass fishing line for years and is affordable. Monofilament has more stretch than fluorocarbon or braid so it is ideal for running shallow-diving crankbaits through wood or rocks.

What gear ratio is best for buzzbaits?

Opt for a high-speed reel with at least a 7:1 retrieve ratio, though 8:1 might be better. The faster the retrieve speed, the easier it is to get the buzzbait’s blade turning, and the faster you can wind it in between casts.

Shopping Cart
Scroll to Top